You are here: Home » Projects
ensuring your projects meet specifications
ENSURING YOUR PROJECTS MEET SPECIFICATIONS
It is our policy that all projects are designed and constructed with the highest regard for quality.
Projects_small
Home / Projects
  • Super Cell Fender, Arch Fender and Cast Steel Pillar Bollard for Kribi Deep Sea Port in Cameroon, Africa

    25-10-2024

    JIER Marine won the bid for Construction of The Basic Infrastructure of Phase Two of The Kribi Deep Sea Port Project at 2023. Kribi Deep Sea Port is located on the Atlantic coast some 285 km from the capital Yaoundé. It is strategically positioned in the center of the Gulf of Guinea and is surrounde Read More
  • JIER Marine supplied Arch Fender and D Fender for Yangzhou Port

    08-07-2024

    Yangzhou Port is located on the Yangtze River coastline of Yangzhou Economic and Technological Development Zone. The reconstruction of Yangzhou Port will not only add 1,000-ton general cargo berths on the east, west and north sides of the inner harbor, but also double the length of the dock shorelin Read More
  • Pull Test of JBT was completed

    11-12-2023

    Recently, the Pull Test of JBT Tee Head Bollard supplied by JIER Marine was completed. The test was performed by a third-party professional laboratory and witnessed by Bureau Veritas. The owner and contractor representative team were very satisfied with the test results. Read More
  • We Installed Fenders And Bollards for ABU QIR MARINE PORT CONTAINER TERMINAL PROJECT.

    10-11-2023

    【SUMMARY】: Recently, JIER Marine has completed all the installation of dock rubber fenders and mooring bollards along with steel ladders & mooring rings and other dock marine furniture for ABU QIR MARINE PORT CONTAINER TERMINAL PROJECT.ABU QIR MARINE PORT CONTAINER TERMINAL PROJECT is located in Abu Read More
  • We installed fenders and bollards for Rizhao Port

    14-09-2023

    【Summary】:Recently, the rubber fenders and mooring bollards supplied by JIER MARINE for 200,000Ton Terminal Rizhao Port, Shandong have been installed. Read More
  • Fenders and  Bollards for ABU QIR MARINE PORT CONTAINER TERMINAL PROJECT were all delivered

    21-04-2023

    On April 21st, rubber fenders and mooring bollards supplied by JIER Marine for ABU QIR MARINE PORT CONTAINER TERMINAL PROJECT were all delivered. Read More
  • Warmly Welcome Kenya Ports Authority and Contractor Team

    18-04-2023

    【SUMMARY】: On April 18th, Kenya Ports Authority and its contractor representatives visited the rubber fender factory of JIER Marine to inspect the quality of our rubber fenders and mooring bollards. JIER Marine’s overseas market team gave them a warm reception. On the afternoon of April 18th, Kenya Read More
  • JIER Marine JCO2500H-The largest Super Cone Fender in the world

    08-04-2023

    NEWS SUMMARY:On April 8th, the Project Owner TENAGA NASIONAL BERHAD (TNB) and Contractor CHINA HARBOUR ENGINEERING COMPANY (CHEC CONSTRUCTION (M) SDN. BHD.) from 275KV TRANSMISSION LINE DEVELOPMENT PROJECT FROM PMU NEW PRAI TO PMU THE LIGHT visited JIER Marine rubber fender factory. We had a deep co Read More
  • JIER Marine won the bid for ECT project

    14-02-2022

    Recently, JIER Marine won the bid for SLPA East Container Terminal Port of Colombo Phase II Project. The project owner is Sri Lanka Port Authority and the EPC contractor is China Harbour Engineering Company / CCCC Fourth Harbor Engineering Co., Ltd. JIER Marine supplied JSC1700H Super Cell Fender Sy Read More
  • JIER Marine Super Cone Fenders--Ready to go to Bangladesh

    09-10-2021

    This week, one big order requiring more than 50 sets of JCO Super Cone Fender Systems including steel front frame with UHMW PE pad, chain system and full sets of anchor accessories from our Bangladesh client has been finished and shipped well. Strict test has been taken before them leaving the facto Read More
  • Total 2 pages  Go to Page
  • Go

ABOUT US

NANJING JIER MARINE CO., LTD.
JIER MARINE is the leading global manufacturer of high performance marine fender system and mooring bollard system, specializing in the design, manufacture and sale of rubber fenders and fender system and bollard system with over 20 years of experience in the engineering and manufacture of rubber fenders and bollards and the related marine accessories.
Contact Us
Home
Copyright © 2025 Nanjing Jier Marine Co., Ltd. All Rights Reserved. Sitemap | 苏ICP备2022008412号-1